Microphone Wireless Transmitter Receiver Universal Wired to Wireless Converter for Recorders Speakers Power Amplifiers

Microphone Wireless System Mic HD Display Wireless Transmitter Receiver Audio Transmission Systems Universal 30m-50m Pickup for Mixers Recorders Speakers Power Amplifiers
Feature:
1. Strong performance. Transmitters and receivers can be used with any dynamic microphone; mixer; PA system. Provides stable wireless transmission without cables. Its range can be up to 100 feet under normal conditions. 30m-50 pickup distance; wireless transmission; clear sound and strong penetrating power.
2. Efficient transmission. 2.4Ghz wireless microphone system. Latency is less than 5ms; with less delay and less signal loss. 24-bit audio resolution with a sampling frequency of 48K. High-quality audio provides you with stable sampling rate stereo uncompressed digital transmission.
3. Long-lasting battery life. High-performance electric polymer lithium battery; lasting more than 5 hours; charging at the same time with dual terminals
4. High-definition display. Display the frequency band and power in real time; pay attention to the power in time; and it is easy to use. Highlight the on-off condition of the machine to prevent forgetting to switch off.
5. Automatic frequency pairing when power on; 16 groups of frequency points are available. After the transmitter is turned on; it will automatically match with the idle receiver to connect 16 adjustable frequency points; supporting multiple sets of equipment to be used at the same time.
6. Hard material. The material of the fuselage is upgraded; and the fuselage is firm and straight; making the grip more comfortable.
7. Smart Compatibility: Connect the sound card. Connect a sound card to bring more special effects and a new look. Note: Only for the use of dynamic microphones (If the sound card comes with a 6.5mm microphone interface; it can be directly connected to the dynamic microphone. The 6.5mm conversion head we equipped adopts the latest connection technology to directly connect to the sound card; and the curved design is more suitable for use; if the sound card comes with a 3.5mm microphone interface; you need to use a 3.5mm converter to connect to a dynamic microphone)
8. Simple to use. One-key pairing; supports multi-channel. Frequency hopping can be set. Plug and play; compact and lightweight. Makes wireless microphone systems easy to use and carry.
9. Strong versatility: equipped with XLR female to 6.5mm male microphone adapter; compatible with mixers; recorders; speakers; sound reinforcement systems; power amplifiers; etc.

Specification:
Name: Dynamic microphone + condenser microphone universal wired to wireless converter
Colour: Black
Frequency range: 500-980 MHz
Adjustable channels: 16 adjustable frequency points
Channel Spacing: 0.5-2.5 MHz
Modulation method: DQPSK
Frequency Stability: ±3 PPM
Frequency Response: 40 Hz-20KHz
Working range: 50-80 M
Built-in battery: 14500 lithium battery
Working voltage: 3.7V
Product weight: about 280g
Product size: about 105x35mm/4.13*1.38 inch

Upgrade:
The second-generation new upgrade is compatible with dynamic microphones and capacitor microphones. 48V condenser microphone; connected to three-pin card interface; condenser/dynamic microphone Provide professional technical support for professional recording; dubbing; webcasting; music performance; etc.
The second-generation product can not only be connected to dynamic microphones; but also compatible with capacitive microphones; and the performance is increased.
The second generation adopts a new green display; which is more vivid and recognizable.
The second generation of 30m-50 pickup distance; wireless transmission; clear sound; strong penetration.
The second generation features higher fidelity sound quality. Intelligent noise reduction; high sound quality restoration; strong anti-interference; help you restore excellent sound quality.
Gain adjustment mode; get rid of wired constraints. Compatible with dynamic microphones and condenser microphones for wireless singing. Three new modes are added: 0V (connected to dynamic microphone mode); 5V (connected to dynamic microphone mode); and 48V (connected to capacitive microphone mode).

Note:
Common for dynamic microphones and capacitor microphones.
With memory function; reboot and short press the power button to display the last adjusted mode.
Smart Compatible. Connecting condenser microphones; connecting condenser microphones brings more possibilities and new sounds. Adjust the mode to 48V to connect a condenser microphone.
Due to the different monitor and light effect; the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.



Packages:
1*Transmitter
1*Receiver
1*6.5mm Conversion Head
1*Double-ended Charging Cable
1*Charging Head